You can choose any stand that holds the approved Samsung Tablets.
While you do not need to have a stand for SNAP to function, we think it's a great add for a professional appearance. There are many stands out here, but this is the one that we've tested at Fit3D.
Overall Stand Requirements:
- The stand needs to fit or hold the stand in an vertical orientation. Some mounts only allow for horizontal mounting.
- The stand needs to be able to hold the tablet completely vertically.
Stand Preferences: - The stand may need to adjust up & down. This is not a requirement, but depending on the height of your clients, it may need to move up & down by several inches. This may be an issue if you have extra tall or short clients. If needed, you can put an object underneath the stand temporarily.
- Lastly - consider how important the look & feel of the stand is to you. SNAP can function easily with a $30 stand off Amazon. However, some facilities will prefer a more expensive & solid stand construction as to appeal to the "look" of the quality of your services. Both a $30 AND $500 stand will function just the same. Decide what's important to you here.
Two Major Directions to Paths for Choosing your Stand:
Again - You may choose any stand that fits the tablet & allows it to stay vertical for scanning.
A. More Economical: Amazon: Roughly $30-100
You should be able to find a telescoping stand on Amazon for an affordable price. These are great for trade shows as well. The main this to focus on is making sure the stand you purchase allows scanning fully vertical.
Things to avoid:
Stands that only tilt most of the way – it has to be fully vertical.
Stands that only go so high – the ideal height is: 39.5" height.
Stands that only allow a tablet to be in landscape orientation – SNAP scans in portrait mode.
B. More Stylish & Professional Appearance: Roughly $500.
Here is the stand that is featured in the picture on the website.
Apex stand from Compulocks HERE.
If you decide to order the brandable panel, we recommend you order it through signs.com. Here is the direct link: https://www.signs.com/acrylic/
Panel Specs:
Acrylic Sign
Item #20671798
Width: 6.25" (inches)
Height: 36.56" (inches)
Thickness: 1/8"(inches)
Shape: Square / Rectangle
Edge: Standard
Print Surface: Second Surface
Drilled Holes Diameter: None
Drilled Holes Location: None
Standoffs: None